3" Diameter GAMMA SCINTILLATION DETECTOR w/ Bicron BC408 Organic Scintillator

Description

I have sold hundreds of custom built Scintillator Detectors to happy customers
This is a 3 inch Scintillation Detector designed for GAMMA Radiation Detection. This probe has been newly manufactured in the iRad shop and lab. It is just over 7 inches in length and weighs about 1 pound 4 ounces.
The Scintillator uses a Bicron/Saint-Gobain BC408 Polyvinyl Toluene & Organic Fluors Plastic Scintillator for Gamma Radiation Detection. The scintillator block measures 3 inch diameter by
1.5 inch thick, polished on all sides and coated with a specially formulated reflective coating before coupling to the PMT. The PMT is a high quality 3" Photomultiplier Tube, and includes a >100 MegOhm dynode chain allowing it to work easily with battery powered meters. After assembly the probe is encased in Black Polyolefin and is quite durable. The detectors are tested from 800v to 1200v, and run very well throughout that range of voltage. The detector can easily be swapped out with GM probes that also run at 900 volts without changing your HV settings (on meters that support scintillation detectors). I recommend this detector probe if you have a Meter with adjustable HV, like a Ludlum Model 3 and most all other Ludlum meters. The detectors come with a 30 day Satisfaction Guarantee.
Background here at sea level for these detectors is about 1500 to 2000 CPM at 900v. Pictures show detection of Cs137. The detector is shown operating on a Ludlum Model 18 at 900V, as calibrated on my Ludlum 500 Calibrator. The probe also runs perfect on my Ludlum Model 3, Model 12, Model 2241-2, Model 2200 Scaler, and Eberline RM-20 all at 800 - 1100v. Voltage requirements on your meter and specific probe may vary. Background may also vary in your area and with your instrument. Operating Instructions and directions for adjusting HV and Plateau of detector are included in the sale.
This detector can easily detect low levels of Gamma radiation. Since the detector probe is rugged and Non-Hygroscopic, it is great for mineral hunting and field use. More durable and lighter weight than a NaI(Tl) crystal detector of the same size.
These detectors are great for counting applications and survey use, not intended for gamma spectroscopy.
Probe Dimensions:
Length: ~7 inches - 175 mm (including BNC connector)
Diameter: ~3 inches - 78 mm
Weight: ~1 lb 2 oz - 520 grams
This listing is for a Scintillator Detector Probe that includes a BNC connector for connection to your meter. If you prefer a C type (Ludlum) connector, these are available on request, please inquire before purchase. If you prefer to keep the BNC connector but need a BNC to C adapter to use this probe with a Ludlum Meter and C Cable, please see my other listings for the adapter.
I also sell DIY KITs with instructions for those that may want to
learn how to
build a similar detector themselves. Please see my
other items
for this and other kits available.
Only one Scintillator Detector is included in this listing. No other items shown, including test equipment, cables, meters, test sources, or tools are included.
I have tons of other radiation detection related equipment listed, so please check out my
other items
.
I
am always adding new items in this category, so please don't forget to add me to your
favorites list
and come back often!
Expedited Shipping! I ship very fast, same day if early enough, next day otherwise (except Holidays and Weekends). Packaging will be safe and secure, and I guarantee your satisfaction and no DOA. This item comes with a 30 day satisfaction guarantee or your purchase price back upon return of all items in same condition as sent.